The maps:


NO USB                                                                                                             HDMI 2










FAQ:

  1. The TV is displaying "no signal." To resolve this, please use the Samsung remote and click on 'Source.' HDMI 2 is designated for Logitech, while HDMI 3 is for Apple TV.
  2. The Logitech Tap is off, simply unplug the 2nd Ethernet cable under the desk.

    the 1st port = Logitech Rally Cuddle, Port #68 PP.A (IT closet patch panel) > Meraki MS350 10th Floor Switch #1 Port 38
    the 2nd port = Logitech Tap, Port #69 PP.A (IT closet patch panel) > Meraki MS350 10th Floor Switch #1 Port 40
    the 3rd port = tested for spare. Port #70 PP.A (IT closet patch panel) 
  3. For detailed instructions for users, refer the users to the QR manual available on the table and in each corner of the room. 
    It will direct you to https://s3.us-east-1.amazonaws.com/otg.share/presentpas.html
  4. IP 10.100.200.148 for Rally Bar Huddle and 10.100.200.40 for Rally Tap - If necessary, you can remotely reboot devices using the IP address. However, please use sync.logitech.com instead. All the credentials required can be found in 1Password.


Reference:

https://www.logitech.com/assets/66163/vc-product-wiring-diagrams.pdf

https://hub.sync.logitech.com/rallybarhuddle/post/setting-up-rally-bar-huddle-sisPASD6ykbaZ4b